Toshiba PORTEGE R400 Maintenance Manual page 292

4.27 Switch board
4.27 Switch board
Removing the Switch board
The following describes the procedure for removing the switch board. (See Figure 4-45.)
1. Remove the following screw securing the switch board and pull up the switch board.
• M2×4B
2. Disconnect the switch cable from the connector CN9650 on the switch board.
Switch board
Installing the Switch board
The following describes the procedure for installing the switch board. (See Figure 4-45.)
1. Connect the switch cable to the connector CN9650 on the switch board.
2. Install the switch board and secure it with the following screw.
• M2×4B
PORTÉGÉ R400 Maintenance Manual (960-623)
BIND screw
CN9650
Figure 4-45 Removing the switch board
BIND screw
4 Replacement Procedures
×1
M2x4B BIND
Switch cable
×1
[CONFIDENTIAL] 4-73