Toshiba PORTEGE R400 Maintenance Manual page 253

4 Replacement Procedures
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below. (See Figure 4-19.)
1. Connect the Bluetooth antenna cable to the connector on the Bluetooth module.
2. Connect the Bluetooth cable to the connector on the Bluetooth module.
3. Connect the Bluetooth cable to the connector CN4400 on the system board and set
the Bluetooth module to the slot in place.
4. Arrange the Bluetooth antenna cable in place.
5. Secure the Bluetooth module with the following screw.
• M2×4B
4-34 [CONFIDENTIAL]
×1
BIND screw
4.11 Bluetooth module
PORTÉGÉ R400 Maintenance Manual (960-623)