4 Replacement Procedures
Installing the HDD
The following describes the procedure for installing the HDD. (See Figure 4-4 to 4-6.)
CAUTION: Do not hold the HDD by its top and bottom face. It may damage the HDD.
1. Set the HDD in the HDD holder.
2. Stick the gasket in place.
CAUTION: Do not apply pressure to the middle of the HDD assembly. It may damage
the HDD assembly. Hold the HDD assembly by its corners.
Do not reuse the removed gasket.
3. Connect the HDD assembly to the connector of the HDD cable. Press the HDD
assembly to ensure a firm connection.
CAUTION: When connecting the HDD assembly to the HDD cable, insert the guides into
the holes.
4. Set the HDD assembly into the slot.
5. Seat the HDD slot cover and secure it with the following screw.
• M2×6B
4-16
[CONFIDENTIAL]
Hole
BIND screw
Guide
Hole
Guide
×1
PORTÉGÉ R400 Maintenance Manual (960-623)
4.5 HDD