Table of Contents
Advertisement
4.25 LCD unit
Installing the LCD unit
The following describes the procedure for installing the LCD unit. (See Figure 4-42 and 4-
43.)
1. Stand the LCD unit on the display cover and connect the digitizer cable and LCD
cable to connectors on the back of the LCD unit.
2. Stick two glass tapes on each connector.
3. Stick the aluminum tape in place.
4. Install the LCD unit to the display cover and secure it with the following screws.
• M2×4B
PORTÉGÉ R400 Maintenance Manual (960-623)
BIND screw
4 Replacement Procedures
×4
[CONFIDENTIAL]
4-65
Advertisement
Chapters
Table of Contents
