Toshiba PORTEGE R400 Maintenance Manual page 265

4 Replacement Procedures
4.16 LAN jack
Removing the LAN jack
The following describes the procedure for removing the LAN jack. (See Figure 4-27.)
1. Turn up the insulator and disconnect the LAN jack cable from the connector
CN4100 on the system board.
2. Remove the LAN jack from the slot.
LAN jack cable
Installing the LAN jack
The following describes the procedure for installing the LAN jack. (See Figure 4-27.)
1. Turn up the insulator and connect the LAN jack cable to the connector CN4100 on
the system board.
2. Install the LAN jack to the slot.
4-46 [CONFIDENTIAL]
Insulator
Figure 4-27 Removing the LAN jack
LAN jack
CN4100
PORTÉGÉ R400 Maintenance Manual (960-623)
4.16 LAN jack