Toshiba PORTEGE R400 Maintenance Manual page 280

4.24 LCD mask
4 Replacement Procedures
4.24 LCD mask
Removing the LCD mask
The following describes the procedure for removing the LCD mask. (See Figure 4-40 and 4-
41.)
1. Peel off the mask seals (3 points) and rubber masks (2 points) from the LCD mask
and remove the following screws securing the LCD mask.
• M2.5×6B
M2.5x6B FLAT HEAD
(with mask seal)
PORTÉGÉ R400 Maintenance Manual (960-623)
FLAT HEAD screw
Figure 4-40 Removing the LCD mask (1)
4 Replacement Procedures
×5
M2.5x6B FLAT HEAD
(with rubber mask)
[CONFIDENTIAL] 4-61