Toshiba PORTEGE R400 Maintenance Manual page 282

4.25 LCD unit
4.25 LCD unit
Removing the LCD unit
The following describes the procedure for removing the LCD unit. (See Figure 4-42 and 4-
43.)
NOTE: When replacing the LCD unit, do not give the hinge portion a strong press. It may
cause the breakage of the hinge assembly.
Also, use a stand or something under the LCD part to keep the LCD part level
while replacing it.
1. Remove the following screws securing the LCD unit.
• M2×4B
2. Carefully lift up the top of the LCD unit.
NOTE: When lifting up the top of the LCD unit, hold the corners of the LCD unit.
LCD unit
M2x4B BIND
PORTÉGÉ R400 Maintenance Manual (960-623)
BIND screw
Figure 4-42 Removing the LCD unit (1)
4 Replacement Procedures
×4
M2x4B BIND
[CONFIDENTIAL] 4-63