4.8 Cover assembly and Base assembly
4.8
Cover assembly and Base assembly
Removing the cover assembly and base assembly
The following describes the procedure for removing the cover assembly and base assembly.
(See Figure 4-12 and 4-13.)
1. Remove the following screws.
• M2×4B
• M2×4B
Figure 4-12 Removing the cover assembly and base assembly (1)
PORTÉGÉ R400 Maintenance Manual (960-623)
BIND screw
Security torx or BIND screw
4 Replacement Procedures
×2
×1
M2×4B BIND
M2×4B Security torx or BIND
[CONFIDENTIAL]
4-23