Pneumatic arm single ultrawide monitor desk mount (8 pages)
Summary of Contents for Vivo STAND-V104B
Page 1
Quad Monitor Desk Stand Instruction Manual SKU: STAND-V104B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v104b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
TOOLS NEEDED WARNING! DO NOT EXCEED WEIGHT CAPACITY. 15.4lbs Failure to do so may result in serious injury. (7kg) If you do not understand these directions, or if you have any doubts about the safety of the PER ARM installation, please call a qualified technician. Check carefully to make sure there are no missing or Phillips Drill defective parts.
Page 3
STEP 6 (Continued) STEP 4 OPTION B: Curved/Recessed Back Monitor Screw the pole connector (H) down onto the lower pole (E), then screw the upper pole (F) into the pole connector (Note: pole connector set screws may need to be loosened first). Tighten the set Install the VESA plates (B) to monitors using bolts (M-B or M-D), washers (M-E) and spacers screws in the pole connector using the 3mm Allen wrench (L).
Page 4
STEP 11 STEP 8 CAUTION: To prevent tipping, please be careful not to extend the arms too far forward or backward. Tighten or loosen the tilt joints using the 6mm Allen wrench (O). STEP 9 Manage cables using the installed cable clips (I). STEP 12 Adjust monitor alignment using 5mm Allen wrench (N).
Page 5
- 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! AVG. RESOLUTION TIME : 5M 4S 309-278-5303 (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V104B and is the answer not in the manual?
Questions and answers