Cleaning; Storage - Grizzly ERT 530 R Original Instructions For Use

GB
• After the work has been completed
remove all grass and soil from the cut-
ting device and the protective cover.
• Ensure that the ventilation slots are
always clean and free of grass.
• Clean the trimmer with a soft brush or
a cloth.
Never manipulate the cutting de- Never manipulate the cutting de-
vice by inserting worn out original
or alien parts. Only use original
spare parts. Never use metal lines.
The use of alien parts can result in
serious personal injury and cause
irreparable damage to the trimmer
and the guarantee will become
instantly null and void.
Exchanging the line spool:
1. Disconnect the plug from the
mains socket.
2. Turn over the trimmer so that the
cutting head (15) is facing up-
wards.
3. Simultaneously press the two
locks on the cutting head (15)
and remove the hood (23) with
the line spool (24).
4. Insert the new spool with the
smooth side facing upwards in
the cutting head and thread the
two lines through the line eyelets
(22). Ensure that the line ends
do not slip out of the spool slots.
5. Return the hood. Ensure that the
locks of the hood are accurately
inserted in the corresponding re-
cesses of the cutting head. They
lock in audibly.
6. Press the retaining head (21),
release it again and pull the ends
of the cord out a little. Repeat this
process until the ends of the cord
88
project a little beyond the cord cut-
ter)
Check the string cutter. Do not use
the appliance without a string or
with a defective string. Contact our
nearest Service Centre in case the
string cutter is damaged.

Storage

• Carefully clean the trimmer and its
accessories after each use (see
"Cleaning and maintenance"), thereby
avoiding mould formation.
• Store the trimmer in a dry place well
out of reach of children.
• Do not expose the trimmer for exten-
ded periods to direct sunlight.
• Do not wrap plastic sacks around the
trimmer as this could result in the for-
mation of moisture and mould.
• Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the
protective cover does not come into
contact with other objects. This is be-
cause the protective cover could be-
come deformed, thereby changing its
dimensions and its safety properties.