Selecting The Proper Brush; Cleaning And Maintenance; Cleaning - Grizzly ERB 550-1MS Translation Of The Original Instructions For Use

• Use original brushes only.
• Never operate the device in rain
or on wet ground. Operating the
device in rain or on wet ground
can cause an electric shock.
• Always move across the slope
when working on hills.
• Avoid any contact with fixed
obstacles (rocks, walls, picket
fences, etc.) in order to prevent
damages to the device.
• Switch off the device during
breaks or when transporting
it and wait until the brush has
completely stopped rotating.
Using the device:
Never move the brush across plas-
tic or other flooring material while it
is in operation.The brushes could
scratch or damage the surface.
We do not assume any liability for
damages in this case.
• Operate the device at walking speed.
• The arrow
indicates the brush's rotational direc-
tion.
• Always test the device in an inconspic-
uous area before using it on sensitive
floors.

Selecting the proper brush

For information on replacing the brush,
please refer to the "Assembly instructions"
section.
Nylon brush
(black, for stone/concrete,
Select this brush for removing persistent
lichenics and moss on robust grounds.
on the spray guard
10):
Steel brush (narrow,
Select this brush for removing weed,
lichenics and moss from small narrow
joints.
Nylon brush
(grey, for wood/WPC,
For removing weeds, lichens and moss on
wood or similar sensitive materials.
Use the steel brush/nylon brush
(black, for stone/concrete) on
robust surfaces only (road, pave-
ment) as it may damage and/or
scratch the ground.
Cleaning and
maintenance
Always unplug the device before
working on it.
Any work that is not described
in these Instructions must be
carried out by a servicing agen-
cy authorized by us.
Danger of injury!

Cleaning

Do not jet water onto the trimmer
and do not clean it under flowing
water. This would result in the
danger of an electric shock and
the trimmer could be damaged.
Always keep the device clean. Do no
use cleaning agents and solvents.
• Clean the device, brush and splash
guard with a soft brush or cloth after
every use.
• Keep the louvres clean.
GB
17a):
18):
25