Husqvarna Automower Solar Hybrid Technical Manual page 76

4. AUTOCHECK, SERVICE PROGRAM
4.8.4 Programming
Programming is a function to update the mower
program in an Automower.
The latest program can be downloaded from the
Automower support site. This requires Internet access.
Click on Get mower program from support site to
download. After downloading, information about
which program has been installed on your computer
is shown.
Different control boxes in the mower and optional
equipment determine which program is to be used,
see Table 2: Version of the mower program, page 10.
.
IMPORTANT INFORMATION
Always use Automatic programming.
Autocheck then automatically selects the
correct version of the mower program and
there is no risk of Automower being
programmed with the wrong version.
IMPORTANT INFORMATION
Always let Autocheck complete a started
programming process! An interrupted
programming process can block the mower's
control box
To program:
1. Click on the Start button.
Autocheck retrieves the main program and the
language file from the Program folder. These files
are shown in the box to the right of the window.
Autocheck automatically selects the latest
program versions installed on your computer.
2. Autocheck asks a few questions about the design
of the mower before downloading the mower
program.
3. State in the box Choose component version which
type of collision pillar that the connected mower is
equipped with. Autocheck detects the year model
of the mower and preselects the options
accordingly. You only need to make changes if
you replace the collision pillar.
If Autocheck asks whether the display appears
normal: Look at the mower's display, compare it
with the two pictures in Autocheck and choose the
option that resembles the mower.
Autocheck can also ask whether the mower is
equipped with a lift sensor or not.
4. Click OK.
The message Programming finished is shown
when the main program and language file have
been transmitted to the mower.
76 - English
3012-599