Husqvarna Automower Solar Hybrid Technical Manual page 117

7. MAINTENANCE AND SERVICE
Table 15: Service schedule 210 C
No. Check/Action
Carefully clean the cable entries in
1.
the body to ensure the rubber seals
sit correctly.
2. Check the bearings, bearing cage
and hub in the skid plate
(535 07 59-01). Clean between the
skid plate and blade disc
(535 12 63-01) as well as between
the blade disc and the rubber
bellows (535 12 23-01).
Clean under the body: Inside and
3.
outside of the drive wheels
(535 13 60-02), around the front
wheel axles (535 12 56-01) and the
chassis.
4. Check the blades and screws.
5. Check the front wheel bearings.
6. Check the rubber bellows
(535 12 23-01) on the cutting height
adjustment. The rubber bellows
must not be damaged.
7. Check the charging strips
(535 13 59-01) and contact strips
(535 13 74-01).
Check the movability and function
8.
of the collision sensors
(535 12 25-01, 535 09 14-01),
liftsensor (535 12 25-01,
544 14 15-01) and the front body
suspension (535 14 42-01).
9. Check the rubber cap
(535 10 17-01) on the main switch.
The rubber cap must not be
damaged.
10. Check that the mower has the latest
edition and correct version of the
mower program.
11. Make an Auto test of all
components.
12. Check on site that Charging works
correctly.
13. Perform a battery check
For Replaced parts
information,
see:
page 114
page 114
Operator's
manual for
Automower
page 114
page 114
page 88
page 39
page 94
Quick check
page 24 and
page 76
page 67
page 20
page 20
English - 117