Husqvarna Automower Solar Hybrid Technical Manual page 75

4. AUTOCHECK, SERVICE PROGRAM
Operating history: Clear Charges OK
To clear the charging cycle counter Charges OK when
replacing the battery: Click on the Clear Charges OK.
Operating history: Search times
Search times indicates partly an average value of
how long each search for the charging station has
taken, partly a maximum value that indicates how
long the longest search took.
The last 20 search times are shown in the list.
Operating
history: Operating data
This function shows the same data (except Search
times) about a mower's Key data, Mowing and
Charging as Operating data. The difference is that
the values under Operating data, trip can be reset,
just as a mileage counter on a car can be reset. This
function is ideal to use when you wish to see how a
mower works during a specific period.
To reset: Click on the Reset button. The values are
reset and the current date is entered on the Reset row.
Operating history: Fault memory
This list displays the last 50 faults to occur (100 for
220 AC). The fault is displayed with the date and time
and where the last fault to occur is shown at the top of
the list.
You can change the displayed order as required:
• Click on Date to change between the between first
and last faults.
• Click on Fault to show the faults in alphabetical
order.
Selecting a row with a specific fault from the fault list,
displays an extract from the fault tracing guide (see
page 103) in the Fault tracing box. To the left of the
box the possible cause of the fault is listed, and to the
right fault tracing tips and actions are stated.
Clicking on the Table, frequency button allows you to
display a summary of the faults that have occurred on
the connected mower and how many times each fault
has occurred.
All occurring faults saved in the fault memory can be
deleted:
1. Click on Clear Fault memory.
2. Click Yes when asked Clear fault memory list?
, trip
3012-573
English - 75