Husqvarna Automower Solar Hybrid Technical Manual page 79

4. AUTOCHECK, SERVICE PROGRAM
Settings: Reset
Click on Factory settings to restore all settings on
the mower to the original values. To view these
settings, see Table 4: Factory settings, page 42. All
settings except the selected language and PIN code
are reset.
Settings: Customer settings
You can save and transmit all settings that the
customer has made on the mower before and after
fault tracing on the mower by using the function
Customer settings.
Click on Save. A Save as dialog box is shown where
you need to select a file name and then click on Save
to save the settings.
Connect the mower you wish to transmit the settings
to. Click on Transmit. An Open dialog box is shown
where you need to select the file with settings to be
transmitted to the mower. Click on Open.
4.8.6 Log file
Log file is a function that allows information about a
large number of mowers to be saved in a database on
the computer. The information can then be searched
and used even when the mowers are not connected to
Autocheck.
If the Log file is used regularly, when sales are made,
for the winter service and when repairs are made you
gain a good general view of the mowers you have sold
or serviced. You can quickly see how much a mower
has run since its last service, how well it has worked,
which parts you should replace at each service, if the
customer has changed the settings, etcetera. When
carrying out an installation it is both sensible and
appropriate to save all the settings in the log file on site
in the garden for future reference with any
modifications or problems.
The log file has two main functions: Edit and Compare.
In the Edit function you can save new mowers, edit any
mowers already saved, read information, import and
export files and print documents.
In the Compare function you can compare two entries
to see the differences. For example, whether the same
mower has been saved on two different occasions.
3012-590
3012-591
English - 79