Husqvarna Automower Solar Hybrid Technical Manual page 116

Table 14: Service diagram 220 AC, 230 ACX and Solar Hybrid
No. Check/Action
Clean under the body: Inside and
3.
outside of the drive wheels
(535 13 60-02), around the front
wheel axles (535 12 56-01) and the
chassis. For Solar Hybrid: also
clean the solar panel by wiping it
using a damp cloth
4. Check the blades and screws.
Check the two lower front wheel
5.
bearings.
6. Check the rubber bellows
(535 12 23-01) on the cutting height
adjustment. The rubber bellows
must not be damaged.
7. Check the movability and function
of the collision sensors
(535 12 25-01, 535 09 14-01),
liftsensor (535 12 25-01,
544 14 15-01) and the front body
suspension (535 14 42-01).
8. Check the rubber cap
(535 10 17-01) on the main switch.
The rubber cap must not be
damaged.
9. Check that the mower has the latest
edition and correct version of the
mower program.
Check that the chassis halves are
10.
properly greased. Remove the
body, separate the chassis halves
and regrease if necessary. Also
check the contents of the chassis;
wipe off any condensation and dirt.
11. Make an Auto test of all
components.
12. Check on site that docking and
charging work correct.
13. Perform a battery check
116 - English
7. MAINTENANCE AND SERVICE
For Replaced parts
information,
see:
page 114
Operator's
manual for
Automower
page 114
page 114
page 39
page 94
Quick check
page 24 and
page 76
7.3
Regreasing,
page 115
page 67
page 20
page 20