Overheating Protection; Emptying The Waste Collector - UNITED OFFICE UAVK 180 A1 Operating Instructions Manual

Overheating protection

This appliance is fitted with overheating protection. If the motor overheats due to
overloading, the appliance switches itself off automatically.
The overheat/overload LED
cooled down sufficiently.
If this occurs, do the following:
WARNING! – RISK OF INJURY!
► Pull the power plug out of the power socket to prevent unintended starting
of the appliance.
♦ Switch the appliance off by sliding the AUTO/OFF/REV switch
OFF position.
♦ Empty the waste collector
waste collector".
♦ Allow the appliance to cool down for about 30 minutes.
♦ Replace the plug in the mains power socket.
♦ Switch the appliance on by sliding the AUTO/OFF/REV switch
AUTO position. The overheat/overload LED
ance has cooled down sufficiently.
♦ The power/bin full LED
now ready for use.
We recommend that you let the appliance cool down for about 30 minutes after
10 minutes of automatic operation or after 3 minutes of manual operation.

Emptying the waste collector

WARNING! RISK OF INJURY!
► Remove the power plug from the power socket to prevent the appliance
from accidentally switching on.
NOTE
► Empty the waste collector
from being drawn into the cutting blades from below.
► When the waste collector
The power/bin full LED
need to empty the waste collector
♦ Remove the cutter attachment
integrated carrying handles
♦ Empty the waste collector
and paper) must be disposed of separately.
♦ Place the cutter attachment
ed carrying handles
GB │ IE
│
■ 22
continuously lights up red until the motor has
as described in the section "Emptying the
lights up blue continuously. The appliance is
regularly to prevent the shredded material
is full, the appliance switches off automatically.
flashes blue and beeps to indicate that you
.
from the waste collector
.
. Please note that the various waste types (plastic
onto the waste collector
so that the mains cable protrudes to the rear.
to the
to the
goes out when the appli-
using the
using the integrat-
UAVK 180 A1