First use
NOTE
►
Make sure the AUTO/OFF/REV switch
connecting the appliance to a power outlet.
►
As every appliance is tested for functionality after manufacture, it is possible
that you may find paper residue in the cutting blades.
►
This appliance is equipped with a safety switch
must be placed fully on the waste collector
ment
♦
Remove all packaging materials from the appliance.
♦
Place the cutter attachment
ed carrying handles
♦
Insert the plug into a mains power socket.
Operation
Switching the appliance on
♦
Flip the lid
♦
Slide the AUTO/OFF/REV switch
The power/bin full LED
now ready for use.
Inserting paper (manual feed)
CAUTION! PROPERTY DAMAGE!
►
NOTE
►
Fig. 1
UAVK 180 A1
clicks audibly into place. Otherwise, the appliance will not start!
so that the mains cable protrudes to the rear.
up.
Remove any paper clips larger than 25 mm. These could
damage the cutting blades!
Staples (sizes: 24/6 and 23/6 [11.5 x 6 mm], B-8 [11.5 x 7 mm],
No10 [8.4 x 5 mm]) and small paper clips (up to 25 mm) can be
left on the paper.
You can shred up to 7 sheets (80 g/m2 paper) at the same time.
Insert the paper in the portrait format centrally into the
cutting opening
starts automatically and stops automatically when no more
paper is fed.
is in the OFF position before
. The cutter attachment
so that the cutter attach-
onto the waste collector
to the AUTO position for shredding.
continuously lights up blue. The appliance is
from above (see fig. 1). The appliance
using the integrat-
GB │ IE
│
19
■