Page 3
Content Page Intended Application Important safety instructions Technical data Items supplied Appliance description Commissioning Operation Cleaning Non-functionality Disposal Warranty and Service Importer Read these operating instructions carefully before using the appliance for the first time and preserve this maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date. - 1 -...
Strip Cut Shredder To avoid the risk of injury: • This Strip Cut Shredder attachment should be used by only one person at a time. Intended Application • Never leave the appliance unattended whilst in use. This Strip Cut Shredder is intended exclusively for the •...
Appliance description • Always be attentive! Always pay attention to what you are doing and act with common sense. 1 Switch Never use the appliance when you are distracted 2 Cutter opening or don’t feel well. 3 Power cable 4 Telescope arm Technical data Commissioning Mains voltage:...
Page 6
Switching the appliance into the Fwd mode: • Switch the appliance on, in that the switch 1 is • Place the switch 1 for continuous shredding at placed into the position "Auto". the position "Fwd" (forward). The appliance runs continuously. Insert paper from above and in Cleaning portrait format into the cutter opening 2.
Disposal Warning: Remove the plug from the mains power socket to Do not dispose of the appliance in your avoid an unintended starting of the appliance. normal domestic waste. This product is • Allow the appliance to cool down. subject to the European guideline •...
Page 8
DES UK LTD Tel.: 0871 5000 700 (£ 0.10 / minute) e mail: support.uk@kompernass.com Kompernass Service Ireland Tel.: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e mail: support.ie@kompernass.com Kompernass Service Cyprus Tel.: 800 9 44 01 e mail: support.cy@kompernass.com Importer KOMPERNASS GMBH...
Need help?
Do you have a question about the UAV 150 A1 and is the answer not in the manual?
Questions and answers