6.1.7 Set License Keys
Menu Path:
1) config → 7) key
Shortcut Command:
At the root menu, type config key
Description
This menu item is not supported on the OptiStar EdgeSwitch.
6.1.8 Set Communication Parameters
Menu Path:
1) config → 8) com
Shortcut Command:
At the root menu, type config com
Description
The Set Communication Parameters menu item and the related sub menus are not supported on the OptiStar
EdgeSwitch.
When menu item 8) com – Set communication parameters is selected, the following sub menu will be displayed:
config/com menu
1) back
2) show - Show current communication settings
3) console - Set console mode
4) ethernet - Set ethernet parameters
5) slip - Set SLIP parameters
6) modem - Set modem parameters
Enter a number from the config/com menu to go to the corresponding category.
365-575-925R1.5
Issue 1, April 2002
Detailed FCIP Network Module CLI Reference Guide
(For help, go to
(For help, go to
(For help, go to
(For help, go to
(For help, go to
Lucent Technologies
Section 6.1.8.2 on page
6-50)
Section 6.1.8.3 on page
6-50)
Section 6.1.8.4 on page
6-52)
Section 6.1.8.5 on page
6-55)
Section 6.1.8.6 on page
6-57)
6 - 4 9