Get Bgp Peer Table; Get Ospf External Subnet Table; Get Ospf Internal Subnet Table - Lucent Technologies OptiStar EdgeSwitch User's Operation Manual

5.1.7.5.2 Get BGP Peer Table

Menu Path:
[1] Operational Information & Status → [7] Routing Information → [5] BGP4 Parameters
→ [2] Get BGP Peer Table → Enter BGP Peer Number:
Description:
This read-only table shows information specific to each BGP Peer. The BGP Peer is identified by the BGP Peer
Number, which must be entered in order to view the table. The first number starts at 0. To add or delete BGP
peers, from the main menu follow the path:
[3] Configuration → [6] Routing Configuration → [7] Set BGP4 Parameters → [2] Configure BGP Peer

5.1.7.5.3 Get OSPF External Subnet Table

Menu Path:
[1] Operational Information & Status → [7] Routing Information → [5] BGP4 Parameters
→ [3] Get OSPF External Subnet Table
Description:
This read-only screen shows the OSPF External Subnet Table. To add or delete entries to the OSPF External
Subnet Table, from the main menu follow the path:
[3] Configuration → [6] Routing Configuration → [7] Set BGP4 Parameters
→ [3] Configure OSPF External Subnets

5.1.7.5.4 Get OSPF Internal Subnet Table

Menu Path:
[1] Operational Information & Status → [7] Routing Information → [5] BGP4 Parameters
→ [4] Get OSPF Internal Subnet Table
Description:
This read-only screen shows the OSPF Internal Subnet Table. To add or delete entries to the OSPF Internal
Subnet Table, from the main menu follow the path:
[3] Configuration → [6] Routing Configuration → [7] Set BGP4 Parameters
→ [4] Configure OSPF Internal Subnets
Lucent Technologies
5 - 1 4 365-575-925R1.5
Issue 1, April 2002