Set Static Forwarding Database Entry; Add Static Forwarding Database Entry; Delete Static Forwarding Database Entry; Fcip Network Module Configuration - Lucent Technologies OptiStar EdgeSwitch User's Operation Manual

5.3.8.1 Set Static Forwarding Database Entry

The following 2 sections enable the user to add or delete entries to the static forwarding database. For these
sections, the OptiStar EdgeSwitch will need to be rebooted for the changes to take effect.

5.3.8.1.1 Add Static Forwarding Database Entry

Menu Path:
[3] Configuration → [8] Forwarding Database Entry → [1] Set Static Forwarding Database Entry
→ [1] Add Static Forwarding Database Entry
Description:
Enter MAC Address <xx:xx:xx:xx:xx:xx>
Enter Switching Port Number
Note: This function is not available via Web-based Management.

5.3.8.1.2 Delete Static Forwarding Database Entry

Menu Path:
[3] Configuration → [8] Forwarding Database Entry → [1] Set Static Forwarding Database Entry
→ [2] Delete Static Forwarding Database Entry
Description:
Enter MAC Address <xx:xx:xx:xx:xx:xx>
Note: This function is not available via Web-based Management.

5.3.9 FCIP Network Module Configuration

The following 4 sections enable the user to configure local and remote FCIP Network Modules. For these
sections, the OptiStar EdgeSwitch will need to be rebooted for the changes to take effect.
5 - 4 6
:
:
:
Lucent Technologies
365-575-925R1.5
Issue 1, April 2002