Check All Voltages To A13 Source Block - HP 85106D Manual

Check All Voltages to
A13 Source Block
Procedure 10
1. Refer to "Module Interface Adapter" on page 6-8.
The voltages on the front panel of the HP 85105A mm-wave test set
controller are the same ones that enter the HP 85104A, A13 source block,
via the black interface connector on the A5 board assembly (part of A18
source block assembly).
2. Return to the troubleshooting flowchart.
HP 85104A Test Set Module
Troubleshooting Procedures
HP 85106D mm-Wave System 5-21