Table of Contents
Advertisement
Service Program
Procedure Using
HP 85101 Tests
Service Program
Procedure Using
HP 85102 Tests
Service and Troubleshooting
Symptomatic Failure Types
Run the program now using all the tests in the HP 85101 test menu. These
tests can find 95% of all HP 85101 failures, and require approximately ten
minutes to complete.
The steps in the test menu identify the most important HP 85101 tests. The
tests that are not bulleted are primarily adjustments that increase
troubleshooting and may require extra equipment.
If the HP 85101 is working properly, then the HP 85102, the sources, or their
interfaces may be the problem. Verify the operation of the HP 85102 by
running the HP 85102 Service Program tests. Refer to the test menu
provided in Figure 4-4 on page 4-15. This flowchart illustrates the Service
Program path to use for the HP 85102 tests. These tests help find 80% of all
HP 85102 failures and require approximately one minute to complete.
4-18 HP 85106D mm-Wave System
Advertisement
Table of Contents
Troubleshooting
