HP 85106D Manual page 209

R-E
(Rebuilt-Exchange)
Assemblies Cost Less
Replaceable Parts List
Ordering Information
Replaceable Parts
This section contains information for ordering replaceable parts. The
replaceable parts include major assemblies and chassis hardware.
Some assemblies are available through the rebuilt-exchange program.
These factory rebuilt (repaired and tested) assemblies meet all factory
specifications required of a new assembly. They are offered on an exchange
(trade-in) basis only. The defective assembly must be returned for credit.
Figure 6-27 on page 6-47 illustrates the procedure. The rest of the figures
provide parts information. If you have any questions, contact your HP
customer engineer.
The following figures assist in locating and identifying all replaceable parts,
including corresponding lists that provide the following information.
•
Hewlett-Packard part number.
•
Part quantity as shown in the figure. There may be more of the same part
in the instrument.
•
Part description, using abbreviations.
To order a part listed in the replaceable parts lists:
•
Quote the Hewlett-Packard part number.
•
Indicate the quantity required.
•
Address the order to the nearest Hewlett-Packard office.
To order a part that is not listed:
•
Include the instrument model number.
•
Complete serial number.
•
Description and function of the part.
•
Number of parts required.
•
Address the order to the nearest Hewlett-Packard office.
HP 85105A mm-Wave Controller
Replaceable Parts
HP 85106D mm-Wave System 6-45