3.4.2.2 Indication Light
WARNING!
Due to the squeezing hazard, motorized movements are only allowed if patient and
System are observed by personnel.
The Indicator light has 3 different modes:
• Fixed light - The System is in an active mode and in position, waiting to perform an action.
Supervision of the patient and System is required.
• Flashing light - Attention. The System is performing an action, for instance manoeuvering
to start position or waiting for action.
• No light - the chosen mode is not activated. No light will be shown in Free mode or
Autoposition.
3.4.3 Sound Signal
• One sound signal, means that the OTC is in position and ready for exposure.
• Two sound signals, in rapid succession, indicates a fault and the display will show an error
message, for example after a collision. The error message shows the corrective action.
Operator´s Manual
2020-09-25
Ceiling Suspended x-ray Tube Support
0073-095-418-EN Rev. 5.1
Page 57
User Interface
OMNERA®