Table of Contents
Advertisement
3.8.1.1 Tiltable Detector
Remove the lateral armrest (1), see picture A.
Turn the lock handle (2) up to release the detector holder and push the holder in position ac-
cording to picture B.
Then turn the lock handle down to secure the detector holder in position, see picture C in
figure.
A tilting function enables the detector holder to be set in any angle within a range of –20 to
90 degrees.
1
Operator´s Manual
2020-09-25
2
A
Fig. 3-47 Tilting the Imaging unit holder
0073-095-418-EN Rev. 5.1
Page 73
User Interface
Wall stand Control Elements
B
C
OMNERA®
Advertisement
Table of Contents
