Selection Of Technique Mode - Canon OMNERA 400A Operator's Manual

3.1.5 Selection of Technique Mode

There are three different technique modes available that are selected by pushing the Techni-
que mode selection button. The selected mode is highlighted and the pop-up window closes
automatically.
1. AEC mode
2. mAs mode
3. mA/ms mode
Depending on what mode is active, different parameters will be available. Parameters not
available for selection will be grayed out, see the mAs selection button in Fig. 3-5 mAs selec-
tion button grayed out, below.
In AEC mode the value that will be used as back-up value (ms, mAs or fixed), is indicated
with the text AEC Backup.
CAUTION!
For avoiding unnecessary radiation, make sure that the AEC back-up values are prop-
erly defined.
For more detailed information about the different technique modes, please see Operator's
Manual for Canon single console CXDI NE.
Operator´s Manual
2020-09-25
1 2
Fig. 3-4 Technique mode selection
150 200 6,0
kV mA ms mAs mAs
AEC Backup
Fig. 3-5 mAs selection button grayed out
0073-095-418-EN Rev. 5.1
Page 39
User Interface
Overhead Tube Crane
3
5 5
1
AEC
Density
OMNERA®