Maintenance
Type A
1. Raise the wiper arm and slightly
rotate the wiper blade assembly to
expose the plastic locking clip.
NOTICE
Do not allow the wiper arm to fall
against the windshield, since it
may chip or crack the windshield.
7-30
OLMB073020
2. Press the clip (1) and slide the
blade assembly downward (2).
3. Lift it off the arm.
4. Install the blade assembly in the
reverse order of removal.
5. Return the wiper arm on the wind-
shield.
Type B
OLMB073021
1. Raise the wiper arm.
OLMB073022
OLF074017