System Setting And Operation - Hyundai Ioniq Hybrid 2020 Owner's Manual

Driving your vehicle

System Setting and Operation

System setting
• With the Engine Start/Stop button in
the ON or START position, the
Navigation-based Smart Cruise
Control can be activated by select-
→
ing 'User setting
Assistance → Driver Assist →
Highway Auto Curve Slowdown'
from the Settings menu in the info-
tainment system screen. Deselect
the setting to turn off the system.
• If the engine is turned off then on
again, the system maintains the
last setting.
Operating conditions
Select 'Highway Auto
Slowdown' from the Settings menu in
the infotainment system screen and
satisfy the following conditions for
the system to operate.
• Driving on the highway main line
• Smart Cruise Control is operating
If all the mentioned conditions are
satisfied, the system is ENABLED
and the 'AUTO' symbol on the cluster
will illuminate white.
5-134
System operation
Driver
System standby
If the system is ENABLED, the
symbol on the cluster will illuminate
white.
Curve
System in operation
OAEPH058581
If the vehicle decelerates in a curve,
the symbol on the cluster will
illuminate green.
• This system works only for curved
sections located on highway main
lines.
• Depending on the curve ahead on
the road, the vehicle will deceler-
ate, and after passing the curve,
the vehicle will accelerate to the
Smart Cruise Control set speed.
• The higher the driving speed, the
faster the vehicle is decelerated.
OAEPH058582