Hyundai Ioniq Hybrid 2020 Owner's Manual page 176

If you need to recalibrate the com-
pass:
1. Press and hold the
more than 6 seconds. When the
compass memory is cleared a "C"
will appear in the display.
2. Drive the vehicle in 2 complete cir-
cles at less than 8 km/h (5 mph).
Integrated HomeLink
Control System
button for
The HomeLink
System can replace up to three hand-
held radio-frequency (RF) transmit-
ters with a single built-in device. This
innovative feature will learn the radio
frequency codes of most current
transmitters to operate devices such
as gate operators, garage door open-
ers, entry door locks, security sys-
tems, even home lighting. Both stan-
dard and rolling code-equipped trans-
mitters can be programmed by fol-
lowing the outlined procedures.
Additional HomeLink
can be found at: www.homelink.com
or by calling 1-800-355-3515.
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
future HomeLink
also suggested that upon the sale of
the vehicle,
HomeLink ® buttons be erased for
security purposes.
®
Wireless
® Wireless Control
Before programming HomeLink
to a garage door opener or gate
operator, make sure people and
objects are out of the way of the
device to prevent potential harm
or damage. Do not use the
HomeLink
opener that lacks the safety stop
and reverse features required by
federal safety standards (this
includes any garage door opener
model manufactured before April
1, 1982). A garage door that can-
® information
not detect an object - signaling
the door to stop and reverse -
does not meet current federal
safety standards. Using a garage
door opener without these fea-
tures increases the risk of seri-
ous injury or death.
® programming. It is
the programmed
WARNING
®
® with any garage door
3-29
3