Hyundai Ioniq Hybrid 2020 Owner's Manual page 526

4. Unscrew the valve cap from the
valve of the defective wheel and
screw the filling hose (3) of the
sealant bottle onto the valve.
NOTICE
Securely install the sealant filling
hose to the valve. If not, sealant
may flow backward, possibly clog-
ging the filling hose.
OAE068040
5. Plug the compressor power cord
(4) into the vehicle power outlet.
6. With the vehicle ON (
tor ON), switch on the compressor
and let it run for approximately
OAEPH068027 5~7 minutes to fill the sealant up
to proper pressure. (refer to the
Tire and Wheels, chapter 8). The
inflation pressure of the tire after
filling is unimportant and will be
checked/corrected later.
Be careful not to overinflate the
tire and stay away from the tire
when filling it.
OAEPH069016L
indica-
6
6-37