Hyundai Ioniq Hybrid 2020 Owner's Manual page 426

Driving your vehicle
i
Information
• During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
• Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. Depress the brake
pedal at least once after turning ON
the ignition or starting the engine.
5-110
To set Cruise Control speed
1. Press the CRUISE button on the
steering wheel to turn the system
on. The cruise (
cator will illuminate.
2. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
3. Push the toggle switch down
OAE056068
(SET-), and release it. The SET
indicator light will illuminate.
4. Release the accelerator pedal.
) indi-
i
Information
On a steep slope, the vehicle may
slightly slow down or speed up, while
driving uphill or downhill.
OAE056069