Introduction; Equipment; Control Panels - ESAB Caddy Tig 1500i VRD Instruction Manual

2 INTRODUCTION

2 INTRODUCTION
The Tig 1500i / 2200i is a TIG (GTAW) welding power source, which can also be used for
MMA (SMAW) welding. It supplies direct current (DC).
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1

Equipment

The power source is supplied with a 3 m (9.84 ft) welding cable complete with a TIG-torch,
3 m (9.84 ft) return cable, 3 m (9.84 ft) mains cable, instruction manual for power source and
control panel, see Ordering information in the "ORDERING NUMBERS" chapter.
2.2

Control panels

TA33
See the separate instruction manual for a detailed description of the control panels.
0460 826 374
TA34
- 7 - © ESAB AB 2019