Support Plate Removal; Power Electronic Removal - Miele H 408 BM Series Technical Information

H 408x BM
4.8

Support Plate Removal

1. Remove the appliance from its cabinet; see Section 011-4.3.
2. Remove the screws securing the appliance lid. Remove the lid.
Danger!
Before performing any service or repair work, discharge the high-voltage
capacitor. See Section A-2.
3. Remove the fascia panel. See Section 040-4.5.
4. Remove the door spring. See Section 011-4.6.
5. Remove the screws securing the support panel (Figure 040-4, Item 3).
6. Remove the panel.
4.9

Power Electronic Removal

1. Remove the appliance from its cabinet; see Section 011-4.3.
2. Remove the screws securing the appliance lid. Remove the lid.
Danger!
Before performing any service or repair work, discharge the high-voltage
capacitor. See Section A-2.
3. Disconnect all connections from the power electronic.
4. Release the power electronic board from its retainers at the corners and
sides.
81
Technical Information