Technical Information
4.6
Door Hinge Removal
1. Remove the door. See Section 020-4.5.
2. Remove the screws securing the door hinges (Figure 020-2, Item 1).
3. Remove the door hinges.
Figure 020-2: Door Hinge Removal
Danger!
When installing the hinges, place 3 blue magnetic strips, 1" x 2.8" x 0.03"
(mat. no. 05055650) as spacers along the lower oven cavity edge (Figure
011-7, Item 2).
After re-installation, adjust the door switches; see Section 011-4.9.
After installation is completed, as a matter of standard practice, check the
oven for a tight seal with a microwave leak detector, paying particular attention
to the door and the housing edges.
46
H 408x BM