Removing The Fascia Panel With Support Plate; Figure 040-4: Fascia Panel Removal - Miele H 408 BM Series Technical Information

Technical Information

Figure 040-4: Fascia Panel Removal

4.7

Removing the Fascia Panel with Support Plate

1. Remove the appliance from its cabinet; see Section 011-4.3.
2. Remove the securing the appliance lid. Remove the lid.
Danger!
Before performing any service or repair work, discharge the high-voltage
capacitor. See Section A-2.
3. Remove the door spring. See Section 011-4.6.
4. Open the door.
5. Remove the T20 screws securing the sides of the fascia panel (Figure
040-4, Item 1).
6. Loosen the screws securing the sides of the support plate (Figure 040-4,
Item 3). Pull the fascia panel/support plate forward and disconnect the
ribbon cable.
7. Remove the fascia panel with support plate.
80
H 408x BM