Remote Start - Sentiotec Wave.com4 infra Instructions For Installation And Use Manual

Instructions for use for the user
Uses of each program:
Program 1: Recovery and relieving tension.
Program 2: Warming up the muscles before sport.
Program 3: after a short period of sporting activities (e.g. half an hour running).
Program 4: after a long period of sporting activity (e.g. two hours of tennis).

7.6. Remote start

NOTE
EN 60335-2-53 states that infrared modules may only be operated in
remote control mode if the cabin door is equipped with an interlock
(e.g. door monitor) which overrides standby mode for remote control
when the cabin door is opened.
This is how to activate the remote start function:
In the Temperature menu item, hold down the Minus button
2 seconds. This first takes you to the operating mode menu. Pressing the Mode
button takes you to the remote start menu.
7
F 50............Remote start deactivated
F 51............Remote start activated
Use the Plus button
Press the Mode button
or Minus button
6
to confirm the selection.
7
5
to select the mode.
5
p. 22/26
and Plus button
6
for