Safety Information For The Installer - Sentiotec Wave.com4 infra Instructions For Installation And Use Manual

Instructions for installation and use
Suitable infrared heaters: DIR-350-R, WIR-350-R, DIR-500-R,
WIR-500-R, DIR-750-R, WIR-750-R, DIR-1300-R, WIR-1300-R,
ECO-350-R, ECO-350-G, ECO-500-R, ECO-500-G, ECO-750-R
Suitable infrared plates: IR-WP-100, IR-WP-175, IR-WP-390,
IR-WP-510, IR-WPHL-100, IR-WPHL-175, IR-WPHL-390,
IR-WPHL-510
NOTE
Infrared plates and foils may only be used in conjunction with
the optionally available WC4-IRF-F foil sensor.
Any use exceeding this scope is considered improper use. Improper
use can result in damage to the product, severe injuries or death.

2.2. Safety information for the installer

● The clamping connections may only be installed by a qualified
electrician or similarly qualified person.
● The plugs connectors may be installed by the user.
● Installation and connection work on the infrared controller
may only be carried out with the power supply disconnected.
● For the permissible ambient conditions, see the technical data
on "11. Technical data" on page 26.
● Also comply with the regulations applicable at the installation
location.
● For your own safety, consult your supplier in the event of prob-
lems that are not described in sufficient detail in the installation
and operating instructions.
p. 6/26