Room Temperature Mode - Sentiotec Wave.com4 infra Instructions For Installation And Use Manual

Instructions for use for the user

7.4. Room temperature mode

Room temperature regulation for infrared radiator or plate/foil operation
Mode button:
Temperature:
Heating Time:
Light:
Fan:
NOTE
Note the setting ranges for each mode:
● Infrared radiator in the range of 30 - 70 °C.
OR
● Infrared heat plates or foils in the range of 30 - 60 °C
(maximum permissible foil temperature measured via F2: 85 °C)
MODE
Use MODE to switch between the menu items:
Heating, Heating Time, Light and Fan.
Use the +/- buttons to set the required
1
2
cabin temperature.
Use the +/- buttons to set the heating time (5-minute
increments from 5 to 60 minutes). Press the On/Off
button to start the timer. An A appears in the display
and the time counts down. Pressing the On/Off
button again in the Heating Time menu will stop
the timer. The controller operates until it is switched
off (max. 6 hours).
Use the +/- buttons to turn the lighting up and down.
Use the +/- buttons to set the fan power. Pressing
the On/Off button starts the fan, pressing the On/Off
button again in the Fan menu stops the fan.
p. 20/26