Communication Debug Between Gateways And Gree Vrf Monitoring System - Gree Ultra Heat GMV Multi VRF Heat Pump Series Service Manual

Ultra Heat GMV VRF Technical Service Manual
communication lines and DIP settings.
4.4 Communication Debug between Gateways and Gree VRF Monitoring
System
After installing the software successfully, it is starting with the system by default. If the users need to
start up or shut down the software by themselves, they can find the menu of this software in start menu
of the system.
Step 1: Click AutoRun, the software will start up with the system (PC).
Step 2: If the G module is connected directly to the computer using the network cable, set IP
address of PC to 192.168.0.x, with x>2. And set address mask to 255.255.255.0. Then input server IP
address in address field of browser (for current unit, input http://localhost).
Step 3: Log in to VRF Monitoring System. For the first usage or after resetting the system, check
equipment connection status in main interface (click ―VRF monitoring system‖ on the left corner to enter
the main interface), to make sure G module quantity and IDU & ODU quantity displayed on the page are
consistent with actual quantity.
226
REMOTE CONTROL