System Functions - Gree Livo 4LIV09HP115V1AH Owner's Manual

SYSTEM FUNCTIONS

WHISPER QUIET
Not only are the GREE systems energy efficient but they are quiet too. 4LIV High-Wall units operate with sound
pressure levels starting as low as 26 dB(A).
MULTI FAN SPEEDS
Whether operating in either Cooling or Heating mode, the indoor fan can be set to your choice of four different fan
speeds (low, medium, high and turbo) to achieve maximum comfort.
INTELLIGENT PREHEATING
The 4LIV system guards against the annoying cool air blown into the room in heating mode. The system constantly
monitors the discharge air temperature. It will delay the indoor fan until the indoor coil has warmed up to prevent
blowing uncomfortable cool air into the room.
I-FEEL FUNCTION
The unit will sense room temperature at the remote controller instead of at the indoor unit. It then adjusts airflow and
temperature accordingly for ultimate personal comfort.
ADJUSTABLE AIRFLOW
The 4LIV system has a bi-directional airflow control for maximum comfort. The indoor unit
has adjustable vertical and horizontal swing louvers and can be set in multiple discharge directions. However, only
vertical swing louver is automatic and can be adjusted from the wireless remote controller.
TURBO MODE
Use Turbo Mode for situations where you wish to achieve the desired room temperature in the shortest possible time.
This mode runs the unit at ultra high speeds for quickest results.
VACATION MODE (FREEZE GUARD)
Vacation mode (freeze guard) sets the unit to 46°F (8°C) in heating to keep the temperature in the space above freezing.
TIMER MODE
The unit can be programmed to turn ON or OFF after a specific amount of time. The time period is adjustable between
one half and 24 hours.
MODE BUTTON
The unit can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
L I VO GEN4 OWNERS MANUA L - IND O OR UNIT | 8