Software; List Of Parts; Preliminary Check - Gree Ultra Heat GMV Multi VRF Heat Pump Series Service Manual

Ultra Heat GMV VRF Technical Service Manual
2.3.5 Cautions on installation

It must be installed indoors. Avoid knock or exposure to sunshine or rain. It is suggested to place in
the control room together with the computer.

The manufacturer's original equipment must be used. Never use any other model or substitute
product.

Independent power supply is required. Make sure to install adequate 220V AC socket for power
supply.

3 SOFTWARE

3.1 List of Parts

Parts of VRF Monitoring System:
Part Quantity
USB Flash Disk
Installation guide

3.2 Preliminary Check

1) Check whether the gateway has been successfully debugged. If not, refer to the Technical
Service Manual of Gateway to debug the gateway.
2) Check whether the server has serial ports. If not, replace the server with one that has serial ports.
3) Check whether the server is configured with driver that can read USB Flash disks. If not, replace
the server with one that has driver.
4) Check whether the server satisfies the following software configuration requirements.
Software configuration of VRF Monitoring System:
94mm
V+ V- E
Supply Range
1 SC
1 SC
R+ R-
POWER
Data
R+ R-
72mm
88mm
Used for installing VRF Monitoring System on a PC.
Providing instruction on the installation of VRF Monitoring
System.
213
REMOTE CONTROL
25mm
Purpose