vimec V65 B.I. Original Instructions Manual page 18

1. System supply condition
2. Installing the lower rail
3. Installing the upper rail
4. Assembling the carriage
5. Positioning the charging station (if applicable)
6. Connecting the power supply unit
7. Connecting the installation engineer's control panel
8. Fixing the connecting feet
9. Fitting the bars
10. Assembling the platform with driven front access
11. Assembling the platform
12. Preparing the stairlift for setup
13. Setting up the stairlift
14. Checks on installation
15. Adjusting rail bend rollers
16. Adjusting guide shoe supports
17. Fitting the over-run device cams
18. Check the position of the over-run device cam and plates
19. Stretching the chain
20. Final testing
21. Fitting the casings
22. Fitting the caps and end covers
ASSEMBLY INSTRUCTIONS
CONTENTS OF THE MANUAL
18
Page 19
Page 20
Page 22
Page 23
Page 25
Page 27
Page 27
Page 29
Page 30
Page 31
Page 34
Page 36
Page 37
Page 37
Page 38
Page 38
Page 39
Page 40
Page 40
Page 40
Page 41
Page 42