Advertisement
3.2 Assigning the AS-Interface addresses
Please note
Addressing valve terminal type CPV..-GE-ASI-8E6A-Z is
only permitted with addressers as per specification 2.1.
Other addressers do not permit clear access to the
slaves and in some cases overwrite the ID1 codes.
Recommendation: Use the Festo addresser type ASI-PRG-
ADR with adapter cable type KASI-ADR.
Factory setting:
The addressing device scans the existing slaves in the
AS-Interface network.
S
Assign the desired addresses to the two slaves one
after the other.
Operation with AS-Interface masters < Spec. 2.1
Operation with AS-Interface masters < Spec. 2.1 is possible
but both slaves must be programmed as A slave.
Recommendation: For operation with AS-Interface masters
< Spec. 2.1 use valve terminal type CPV..-GE-ASI-8E8A-Z
instead of CPV..-GE-ASI-8E6A-Z.
6
Slave 1: address #1, A slave
Slave 2: address #1, B slave
Festo CPV10/14-ASI-8E6A 2018-11b English
Advertisement
