Festo CPV-GE-ASI-8E6A-Z Series Brief Description page 12

3.6 Connection example – valve terminal type 10
1
AS-Interface master
2
Combination power­
supply from Festo
(electronically safe­
guarded/short-
circuit proof )
3
Load voltage can
be switched off
3.7 Converting the valve terminal
The CPV valve terminal can be fitted with double-solenoid
and/or single-solenoid valves. During conversion, the new
valve terminal configuration must be set on the DIP
switches on the bottom of the electric sub-base.
1
DIP switch 1:
Valve locations
1 to 4 (slave 1)
2
DIP switch 2:
Valve locations
5 to 8 (slave 2)
Instructions on removign the electric sub-base can be
found in the Pneumatics Manual. The permitted valve com­
binations as well as the relevant DIP switch settings can be
found in the table in section 3.3.
12
1
2
3
1
Festo CPV10/14-ASI-8E6A 2018-11b English
0 1 2 3 4 5 6 7
2