Removing The Vesda Filter; Replacing The Vesda Filter - HP POD 40c G2 Maintenance And Service Manual

Performance optimized datacenter

Table of Contents

Removing the VESDA filter

1. Remove the filter cover on the front of the VESDA unit.

2. Remove the 10mm screw that secures the VESDA filter (1), and then remove the filter (2).

1. Insert the new VESDA filter (1), and then replace the 10mm screw that secures the filter (2).

Removal and replacement procedures 61

Table of Contents

Do you have a question about the POD 40c G2 and is the answer not in the manual?

695161-001