Vesda Filter - HP POD 40c G2 Maintenance And Service Manual

Insert the sensor wire into the nut (1), secure the wire by turning the nut clockwise (2), and then insert the
2.
wire into the terminal block (3).
Replace the sensor cover (1), and then secure the cover with four screws (2).
3.

VESDA filter

The VESDA filter sensor notifies you through the ECS when a filter must be changed. HP recommends
periodically inspecting and changing each VESDA filter. A VESDA filter can be replaced during normal HP
POD 40c G2 operation.
You need a Phillips-head screwdriver for installation.
Removal and replacement procedures 60