External Pressure Gauge Isolation Valve; Removing The External Pressure Gauge Isolation Valve; Replacing The External Pressure Gauge Isolation Valve - HP POD 40c G2 Maintenance And Service Manual

External pressure gauge isolation valve

The external pressure gauge isolation valve is located on top of the HP POD 40c G2.
You need an adjustable wrench or an appropriately sized box wrench for installation.

Removing the external pressure gauge isolation valve

Loosen the connection securing the valve (1), and then remove the valve (2).

Replacing the external pressure gauge isolation valve

Insert the new valve (1), and then tighten the connection (2).
Removal and replacement procedures 37