Removal And Replacement Procedures; Safety Considerations; Operator Safety; Fire Detection And Suppression - HP POD 40c G2 Maintenance And Service Manual

Performance optimized datacenter
Table of Contents

Advertisement

Removal and replacement procedures

Safety considerations

The HP POD 40c G2 is listed to the UL 69050 standard as an Information Technology Product and Classified
according to the NEC, NFPA-70, 2008.
The HP POD 40c G2 is not suitable for long term personnel occupancy.
The safety information is specific to the people operating and maintaining the components of the HP POD
40c G2.
IMPORTANT:
plumber.
IMPORTANT:
electrician.

Operator safety

The HP POD 40c G2 provides service access areas for periodic maintenance and service and is only to be
used by owner-authorized personnel specifically trained in the maintenance and service of the HP POD 40c
G2.
The HP POD 40c G2 is not a habitable structure suitable for long term personnel occupancy.
WARNING:
requirements when opening or working inside areas of the HP POD 40c G2 that are marked as
hazardous voltage, per NFPA 70E in accordance with NEC (NA) and IEC (EMEA and APJ).
WARNING:
when working inside the HP POD 40c G2.
WARNING:
anything inside the electrical busways except the approved HP busway drop boxes.
The customer is responsible for completing any Environmental Health and Safety (EHS) evaluation of the HP
POD 40c G2 or any attached structural component purchased through HP. The customer must complete an
arc flash assessment of the HP POD 40c G2 and the associated electrical supply system for operation,
maintenance, and so on.

Fire detection and suppression

The fire suppression system, supplied as an optional component of the HP POD 40c G2, is a "Manufacturer
Designed" system specifically for this HP product, in compliance with national standards.
All plumbing to and from the HP POD 40c G2 must be completed by a licensed
All wiring in and around the HP POD 40c G2 must be completed by a licensed
To avoid the risk of personal injury or loss of life, all personnel must comply with PPE
To avoid the risk of personal injury, hearing protection must be worn at all times
To avoid the risk of personal injury or damage to the equipment, do not insert
Removal and replacement procedures 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

695161-001

Table of Contents